Volume 2, Issue 3 (In Progress)


In Progress
Citations: Crossref logo 0,   0   |   Viewed: 440, Download: 131

Table of Contents

Open Access | Research Article | 14 August 2026
Thermal Conversion of Cobalt Based Hexacyanoferrates into Derived Cobalt Oxides for Supercapacitor Applications
Journal of Advanced Electronic Materials | Volume 2, Issue 3: 89-100, 2026 | DOI: 10.62762/JAEM.2026.780043
Abstract
We report the synthesis of cobalt-based hexacyanoferrate (Co-HCF) via a simple co-precipitation method and its subsequent conversion to a derived oxide through thermal treatment. Comprehensive characterization was performed using X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and energy-dispersive X-ray spectroscopy (EDX). XRD confirms the cubic crystal structure corresponding well to the JCPDS card no. 00-024-0327. FTIR confirms the presence of functional groups in Co-HCF, while the annealing process results in the complete removal of the cyanide ligands, yielding the derived oxide. SEM and EDX analyses confirm the cubic morpholo... More >

Graphical Abstract
Thermal Conversion of Cobalt Based Hexacyanoferrates into Derived Cobalt Oxides for Supercapacitor Applications
Open Access | Research Article | 13 August 2026
Preparation and dielectric properties of BaCa$_4$Nb$_4$TiO$_{17}$ layered Perovskite at microwave frequencies
Journal of Advanced Electronic Materials | Volume 2, Issue 3: 82-88, 2026 | DOI: 10.62762/JAEM.2026.155204
Abstract
The layered BaCa$_4$Nb$_4$TiO$_{17}$ perovskite ceramic was synthesized via conventional solid state mixed oxide sintering process. The material was sintered in a range of 1375$^{\circ}$C to 1500$^{\circ}$C for 4~h to develop dense ceramic. Relative density of 97\% was achieved while sintering at 1450$^{\circ}$C for 4~h. The XRD data analysis confirmed single phase layered perovskite and the microstructure comprised well-connected plate-like grains with an average grain size of $\sim$5.46~$\mu$m as determined by ImageJ software. The material offers a good combination of microwave dielectric properties such as $\varepsilon_r \sim 57$, $Q_{uf} \sim 9500$~GHz and $\tau_f \sim 30$~ppm/$^{\circ}$... More >

Graphical Abstract
Preparation and dielectric properties of BaCa$_4$Nb$_4$TiO$_{17}$ layered Perovskite at microwave frequencies
Open Access | Research Article | 10 July 2026
Improved Thermal Stability of Dielectric and Electrical Properties of Chemically Modified Na$_{0.5}$Bi$_{0.5}$TiO$_{3}$ Based Ceramics
Journal of Advanced Electronic Materials | Volume 2, Issue 3: 69-81, 2026 | DOI: 10.62762/JAEM.2026.170619
Abstract
In the present study, Na$_{0.329}$Bi$_{0.329}$Ba$_{0.042}$Sr$_{0.30}$TiO$_3$ (NBBST) and its solid solutions with Nd(Mg$_{0.5}$Ti$_{0.5}$)O$_3$ (NMT), Nd(Mg$_{2/3}$Nb$_{1/3}$)O$_3$ (NMN), and Nd(Zn$_{2/3}$Nb$_{1/3}$)O$_3$ (NZN) were synthesized and investigated. The phase composition, microstructure, dielectric properties, and impedance characteristics were analyzed for their optimized dense sintered forms. X-ray diffraction (XRD) confirmed the formation of a single-phase perovskite structure in all compositions within the detection limit. All ceramics exhibited dense microstructures; however, the doped samples showed a reduced average grain size compared to pure NBBST. Among the composition... More >

Graphical Abstract
Improved Thermal Stability of Dielectric and Electrical Properties of Chemically Modified Na$_{0.5}$Bi$_{0.5}$TiO$_{3}$ Based Ceramics